Emerson ROSEMOUNT 5300 Spécifications télécharger pdf (Page 43)

Reference Manual

00809-0600-4026, Rev BA

December 2011

3-11

Rosemount Process Radar

Recommended Actions:

• If bent probe, try to straighten it gently. If this is not possible, a

replacement of the complete probe assembly may be required

• Verify that mounting considerations described in the Rosemount 5300

Series Reference Manual (Document No. 00809-0100-4530) section

“Mounting Considerations” are fulfilled. The probe length should match

the tank/chamber length. For more information, refer to the Using

Guided Wave Radar for Level in High Pressure Steam Applications

Technical Note (Document No. 00840-0100-4530)

• Consider adding a centering disk at the bottom of the probe, for more

information see the Rosemount 5300 Series Reference Manual

(Document No. 00809-0100-4530) section “Mounting a Centering Disc

for Pipe Installations”. This helps to keep the probe centered in the

chamber/still-pipe. For more information, refer to the Using Guided

Wave Radar for Level in High Pressure Steam Applications Technical

Note (Document No. 00840-0100-4530)

• If flexible probe in contact with nozzle, consider using a long stud, for

more information see the Rosemount 5300 Series Reference Manual

(Document No. 00809-0100-4530) section “Mounting Considerations”.

Read Diagnostics

Verify that no Errors or unattended Warnings are present.

Figure 3-12. The Diagnostics

window in RRM

To view Diagnostics in Rosemount Radar Master:

Rosemount Radar Master > Tools > Diagnostics

For more information, see the Rosemount 5300 Series Reference Manual

(Document No. 00809-0100-4530) section “Diagnostics”.

Step 6. Archive Files Save Echo Curve and Config File

Permanently store the echo-curve and configuration back-up files for future

use, with re-occurring verification procedures.

In Rosemount Radar Master:

Rosemount Radar Master > Device > Backup Config to file

Rosemount Radar Master > Tools > Echo Curve > Record

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 105 106

Pas de commentaire

Emerson ROSEMOUNT 5300 Spécifications Page 43