Emerson ROSEMOUNT 5300 Spécifications télécharger pdf (Page 22)

Reference Manual

00809-0600-4026, Rev BA

December 2011

Rosemount Process Radar

2-12

4. The first window in the Configuration Wizard presents general

information such as Device Model (5301 / 5302 / 5303), serial number,

Probe Type, Probe Length, communication protocol, and device

address. Check that the information complies with the ordering

information and click Next.

5. The General window lets you enter Tag, Message

(1)

, Descriptor

(1)

, and

Date

(1)

. This information is not required for operation of the transmitter

and can be left out if desired. Fast Key Sequence [2, 2, 1]. Click Next and

the following window appears (Probe).

6. Verify that the parameters in the Probe window are correct. The

parameters are normally configured at the factory, but can be changed if,

for example, the probe is cut in the field, or if disturbing objects in the

near zone need to be blocked out (Hold Off Distance/Upper Null Zone

(UNZ)).

Fast Key Sequence [2, 1, 2].

OUNDATION fieldbus parameters:

TRANSDUCER 1100>PROBE_TYPE

TRANSDUCER 1100

>PROBE_LENGTH

TRANSDUCER 1100

>GEOM_HOLD_OFF_DIST

(1) Only for HART communication.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 105 106

Pas de commentaire

Emerson ROSEMOUNT 5300 Spécifications Page 22