Emerson MICRO MOTION 2700 Manuel d'installation Page 131
- Page / 264
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Transmitter Configuration and Use: Series 1000 and 2000 Transmitters 121
Troubleshooting continued
Troubleshooting DiagramsDefaultsCompensation
A112 Series 1000/2000
software upgrade
recommended
NA Contact Micro Motion to get a Series 1000/2000
transmitter software upgrade. See Section 10.3.
Note that the device is still functional.
A113 Analog output 2
saturated
Analog 2 Saturated See Section 10.17.
A114 Analog output 2 fixed Analog 2 Fixed Exit mA output loop test. See Section 5.3.
Exit mA output trim. See Section 5.4.
Check to see if the output has been fixed via digital
communication.
A115 External input error External Input Error HART polling connection to external device has
failed. Ensure that external device is available:
• Verify device operation.
• Verify wiring.
Verify polling configuration. See Section 9.4.
A116 API temperature out of
limits
API temperature out of
limits
Verify process.
Verify API reference table and temperature
configuration. See Section 8.5.
A117 API density out of limits API density out of limits Verify process.
Verify API reference table and density configuration.
See Section 8.5.
A118 Discrete output 1 fixed DO1 Fixed Exit discrete output loop test. See Section 5.3.
A119 Discrete output 2 fixed DO2 Fixed Exit discrete output loop test. See Section 5.3.
A120 Bad fit data fault. Bad fit data fault Verify enhanced density configuration.
A121 Extrapolation warning Extrapolation warning Verify process temperature.
Verify process density.
Verify enhanced density configuration.
NA Density FD cal in
progress
NA Be advised that density calibration is in progress.
NA Density 1st point cal in
progress
NA Be advised that density calibration is in progress.
NA Density 2nd point cal in
progress
NA Be advised that density calibration is in progress.
NA Density 3rd point cal in
progress
NA Be advised that density calibration is in progress.
NA Density 4th point cal in
progress
NA Be advised that density calibration is in progress.
NA Mech. zero cal in
progress
NA Be advised that zero calibration is in progress.
NA Flow is in reverse
direction
NA Be advised that the process is flowing in reverse
direction.
Table 10-5 Status alarms and remedies (continued)
Alarm
code Communicator ProLink II software Possible remedy
- Micro Motion 1
- Series 1000 and 1
- Series 2000 Transmitters 1
- Contents 5
- Chapter 1 11
- Before You Begin 11
- Before You Begin continued 13
- Topic Document 13
- Term Definition 13
- Item Configuration data 15
- Chapter 2 17
- Using the Transmitter Display 17
- –8.100E 5 19
- Chapter 3 21
- Poll button in the Connect 26
- 1 and 2, or to the 26
- Connect to Device 32
- Chapter 4 33
- 375 Field Communicator 33
- Chapter 5 39
- Flowmeter Startup 39
- Flowmeter Startup continued 40
- 5.5.3 Zeroing with ProLink II 50
- Chapter 6 53
- Sensor type 54
- T- S er ie s O t he r 54
- Newer tag Older tag 55
- Flow FCF X.XXXX FT X.XX 56
- Terminals 58
- Default Process 58
- Mass flow unit 60
- Volume flow unit 61
- ProLink II code 69
- Communicator 69
- Polarity 75
- Output power 75
- Description 75
- Assignment ProLink II code 77
- Using the Transmitter 79
- Chapter 7 79
- • Model 1700 AN 84
- • Model 1700 IS 84
- • Model 2700 AN 84
- • Model 2700 IS 84
- • Model 2700 CIO 84
- Scroll optical switch 85
- Select optical switch 85
- Function name Communicator 86
- ProLink II 86
- ProLink 87
- Totalizer Control 87
- With a Communicator 88
- Chapter 8 89
- Optional Configuration 89
- Table 8-1 Configuration map 90
- Special 92
- • Model 2500 CIO 93
- Variable Description 94
- Cutoff type Default Comments 96
- Example 1 100
- Example 2 100
- Example 3 101
- Informational panel of the 102
- Status window 102
- Scroll to view process 104
- Max Int. Totalizers stop 106
- Parameter 109
- Series 1000 Series 2000 110
- Process variable 110
- PV SV TV QV PV SV TV QV 110
- Parameter Description 111
- Chapter 9 113
- Compensation, and Polling 113
- Pressure unit 114
- Static pressure 116
- Polled Var 1 119
- Chapter 10 121
- Troubleshooting 121
- Troubleshooting continued 122
- Section Topic 122
- Symptom Cause Possible remedy 132
- Pickoff value 141
- Cause Possible remedy 141
- Test terminal pair 146
- Colors Numbers 146
- Possible cause Solution 147
- Appendix A 151
- Default Values and Ranges 151
- Appendix B 155
- Appendix C 167
- Calibrating the Transmitter 167
- Appendix D 175
- Name Description 176
- Available process variables 178
- Slope and offset 181
- Appendix E 183
- Other configuration options 185
- Preferences menu 187
- Figure E-4 Communicator menus 188
- Appendix F 193
- Figure F-4 Communicator menus 197
- Appendix G 203
- Transmitters 203
- Figure G-4 Communicator menus 207
- Enter password if required 212
- Appendix H 219
- Figure H-4 Communicator menus 223
- Appendix I 235
- Configuration 237
- Figure I-4 Communicator menus 239
- On-Line Menu 240
- 3 Basic Setup 240
- 4 Detailed Setup 240
- 5 Review 243
- Appendix J 251
- Select to disable 252
- Select to enable 252
- Index continued 256
- *20001715* 264
Produits connexes et manuels pour Mesure, test et contrôle Emerson MICRO MOTION 2700
(66 pages)
(3 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels