Emerson USB Fieldbus Interface Manuel d'utilisateur télécharger pdf (Page 19)

CommissionFigure 4-3:

Note

The commissioning process takes about 1 to 2 minutes to complete.

6. Repeat steps 2 through 5 for each device you want to commission.

4.4 Decommission fieldbus devices

Decommissioning sets the fieldbus device address to a temporary address.

Note

Fieldbus devices on a live segment cannot be decommissioned.

1. Launch the Fieldbus Interface Configuration utility.

2. Under the USB Fieldbus Interface icon, select the fieldbus device you

want to configure.

Note

A connected fieldbus device or segment should be powered by an external power source or be

provided power by the Fieldbus Interface Configuration utility for it to be detected.

3. Click Decommission.

May 2014 User's Manual

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

Pas de commentaire

Emerson USB Fieldbus Interface Manuel d'utilisateur Page 19