Emerson Bristol ControlWave LP Manuel d'instructions télécharger pdf (Page 63)

CI-ControlWaveLP Installation / 2-29

Step 3 - Flash Data Setup

Complete the fields in the Flash Data Setup Wizard (see Figure 2-28), as described, below:

"Please enter the name of the binary file to Flash"

To upgrade system firmware, you must specify the path and name of a binary (*.BIN)

file on your hard disk containing the firmware. Normally, the contents of the various

available BIN files are described in a Flash Master File (see box at bottom of the dialog

box). If you have specified a Flash Master File, double-click on the description of the

binary file you want to download to the RTU. Its path and name will be copied into this

field. (If you do NOT have a Flash Master File, type the path and name of the binary file

directly into this field.)

Figure 2-27 - Flash RTU Setup Menu

Figure 2-28 - Flash Data Setup Menu

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 165 166

Pas de commentaire

Emerson Bristol ControlWave LP Manuel d'instructions Page 63