Emerson BDS-256XL Guide de l'utilisateur télécharger pdf (Page 176)

Commissioning Assistant

29-3

29.3. Starting the Assistant for an Existing String

View|Reports|Commissioning Report

This section describes how to start the assistant for a string that is partially or fully

commissioned or for which you want to exchange equipment. To open the assistant, first

connect to the string. On the String View screen, select View|Reports|Commissioning Report

to display one of the Open Commissioning Assistant screens. These screens appear for a

commissioned string or a partially commissioned string if Continue Later was clicked during

a commissioning session.

Figure 138. Open Commissioning Assistant

To continue with a session, click the Open Existing/New Commissioning Session option

button then click OK. If replacing hardware on a previously commissioned string, click the

Exchange Equipment option button, then check a box for the equipment being exchanged.

For units with multiple DCM's, select the appropriate DCM check box. After making

selections, click OK.

One of three MPM or BDS Open

Commissioning Assistant screens

appears. Options on these screens let you

open an existing commissioning session or

exchange a piece of equipment in the

system. Exchanging equipment requires

that the string be commissioned again.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 204 205

Pas de commentaire

Emerson BDS-256XL Guide de l'utilisateur Page 176