Emerson Alber BDSi Guide de l'utilisateur télécharger pdf (Page 167)

MPM Diagnostics

28-1

28. MPM Diagnostics

String View > Diagnostics|Item

The diagnostics are used for production testing, but may help troubleshoot a hardware failure in

the field. Select Diagnostics from String View. The computer must be connected to an MPM and

Communication Status at screen bottom must show Response OK.

28.1. Rebooting and Power Up Diagnostics (MPM)

String View > Setup|Reboot Firmware

To reboot the MPM from the Data Manager, select Reboot Firmware. This does a "warm

reset" of the MPM. At power-up, the unit performs diagnostics for about two minutes. If the

unit fails any test other than failure to detect a dial tone, the Error LED blinks. Identify the

failing parameters by using the Self Test diagnostic.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 218 219

Pas de commentaire

Emerson Alber BDSi Guide de l'utilisateur Page 167