Emerson Alber BDSi Guide de l'utilisateur télécharger pdf (Page 122)

Programming Battery Setup for the BDS

20-19

20.9. Battery Setup: LGS (BDS)

String View > Setup|Battery|LGS

Leibert Global Services (LGS) offers a service in which its Customer Response Center (CRC)

remotely monitors your Alber BDS or MPM equipment and other facility devices around the

clock. The CRC evaluates alarms and provides immediate telephone and e-mail assistance

using a customer-defined response and escalation plan. For details about subscribing to the

service, phone (800) 748-3666 or (800) SITEMON or e-mail [email protected].

If you have subscribed to an LGS monitoring plan, complete the Battery Setup|LGS dialog

box as follows.

Figure 90. Battery Setup - LGS (BDS)

System Type - Type three characters to identify the device being monitored.

For MPM-100, type MPM; for BDS-256, type 256; for BDS-40, type 040.

Site ID - Type the five character ID for customer site identification.

Monitor Device Number - Type the seven digit number used for customer device tracking.

LGS Phone Number - Type the telephone number that connects to the LGS remote

monitoring service. This number is used for a daily communication test and alarm reporting.

LGS Report Time - Type the time the monitor calls in each day to confirm communication.

Use the 24 hour clock; e.g., 13:45.

Enabled - Check this box to enable remote monitoring by LGS. Monitoring is enabled only

after a monitoring plan has been purchased from LGS.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 218 219

Pas de commentaire

Emerson Alber BDSi Guide de l'utilisateur Page 122