Emerson FM-3 Guide de dépannage télécharger pdf (Page 43)

If communications were successful, your screen will look similar to the one in Figure 3.

Figure 3

Step 3: Selecting the Flash file

Click on the “Select File” button (see Figure 3). Doing so will open a window that will allow you to

navigate to the folder where you have stored the downloaded flash (.fsh) file as shown in Figure 4.

NOTE: If you are going to use a flash file that is located on the PowerCD, it is a good idea to copy the file

from the PowerCD to a local folder on your computer’s hard drive. Doing so will avoid the possibility of

any data read errors that can occur between your PC and the CD-ROM drive thereby resulting in the

interruption of the Flash Upgrade process.

WARNING: If the Flash Upgrade process is interrupted, there is a good chance that you will not be able to

proceed without factory assistance. Never interrupt the Flash Upgrade process.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Pas de commentaire

Emerson FM-3 Guide de dépannage Page 43