Emerson Bristol ControlWave Express Manuel d'instructions télécharger pdf (Page 73)

ControlWave Express Instruction Manual (CI-ControlWave Express)

Revised Mar-2011 Service & Troubleshooting 5-13

Figure 5-9. WINDIAG Main Diagnostics Menu

3. Select the component to be tested. See Section 5.4.1 for a

description of the tests. Enter any prompted parameters (slot #,

etc.). WINDIAG performs the diagnostics and displays pass/fail

results.

After performing all diagnostic testing, exit WINDIAG.

4. Set switches SW2-3 and SW2-8 on the CPU module to ON. The

ControlWave Express should resume normal operation.

5.4.1 Available Diagnostics

WINDIAG’s Main Diagnostics Menu (see Figure 5-9) provides the

following diagnostic selections:

Option Tests

CPU & Peripherals Checks the CPU/System Controller board except

for memory.

Analog Output Checks the AO on the Process I/O board.

High Speed Counter Checks HSCs on the Process I/O board and

Pulse Counter inputs on the CPU/System

Controller board.

Prom/Ram Checks the SRAM and FLASH memory.

Analog Input Checks AIs on the Process I/O board.

Communications Checks serial communication ports COM1,

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

Pas de commentaire

Emerson Bristol ControlWave Express Manuel d'instructions Page 73