Emerson Bristol ControlWave ExpressPAC Manuel d'instructions télécharger pdf (Page 8)

ControlWave ExpressPAC Instruction Manual (CI-ControlWave EPAC)

1-2 Introduction Revised Mar-2011

 Wide operating temperature range: (–40 to +70C) (–40 to 158F)

 Battery backup for Static RAM (SRAM) and real-time clock.

 Nonincendive Class I, Division 2 (Groups C and D) Hazardous

Location approvals - See Appendix A.

 Cost-effective for small RTU/process controller applications.

1.1 Scope of the Manual

This manual contains the following chapters:

Chapter 1

Introduction

Provides an overview of the hardware and

general specifications for the ControlWave

ExpressPAC.

Chapter 2

Installation

Provides information on mounting the

ControlWave ExpressPAC and setting CPU

jumpers and switches.

Chapter 3

I/O Configuration

Provides general information on wiring the

process I/O points.

Chapter 4

Operation

Provides information on day-to-day operation of

the ControlWave ExpressPAC.

Chapter 5 Service and

Troubleshooting

Provides information on service and

troubleshooting procedures.

1.2 Physical Description

The ControlWave ExpressPAC includes the following major

components:

 Enclosure with a local communication port and LCD

display/keypad.

 CPU/System Controller Board (SCB) – See Section 1.3

 Optional process I/O board – See Section 1.5

 Internal mounting brackets and battery

 Optional RTD probe– See Section 1.5

 Radio/modem options

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 95 96

Pas de commentaire

Emerson Bristol ControlWave ExpressPAC Manuel d'instructions Page 8