Emerson Bristol ControlWave ExpressPAC Manuel d'instructions télécharger pdf (Page 44)

ControlWave ExpressPAC Instruction Manual (CI-ControlWave EPAC)

2-30 Installation Revised Mar-2011

 Display only (no keypad) – (see Figure 2-20)

Figure 2-19. Optional 2-Button and 25-Button Keypads

Figure 2-20. Display with No Keypad

Both keypads use the same 4-line by 20-character LCD displays.

The Display without a keypad has a 2-line display with 10 characters on

the first line, and 6 characters on the second line. This display shows

variable values on line 1, and variable names on line 2.

You connect the Display/Keypad or Display to the ControlWave

ExpressPAC using a cable, one end of which has an RJ-45 jack

(connected into the RJ-45 equipped with two plugs. This cable connects

between the RJ-45 display jack (J2) on the CPU/System Controller

board and RJ-45 jack (J1) on the remote Display or remote

Display/Keypad assembly. A potentiometer, provided on the keypad,

allows you to set the contrast of the LCD display.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

Pas de commentaire

Emerson Bristol ControlWave ExpressPAC Manuel d'instructions Page 44