Emerson iPro SERIES Manuel d'utilisateur télécharger pdf (Page 73)

________________________________________________________________________________________________________

1592025400 – Vers. 1.0 - 73 -

8.4.3 File PARAM

The file param.txt is the list of parameters for iPRO.

Create a standard txt file with the following structure:

0=value

1=value

.........

9=value

The meaning of 0,1,2, etc is :

0=IP Address 1=HOSTNAME

2=DNS 3=DOMAIN

4=Modbus Address 5=NETMASK

6= NET 7=Net Gateway

9=MODSLAVE_Parameters

The files can be transfer to the iPRO using the USB; at the end the iPRO will reboot

automatically with the new configuration. (It is not necessary to write all the parameters).

8.4.4 File SPALT

The spalt files are files necessary to program the iPRO to send e-mail and sms.

These file are:

• Default.spalt

this file includes the default parameters to configure the modem. You can change:

ANALOG_ENABLE_DIAL_IN = 1: enable 0: disable

ANALOG_RESET = intmodem/intreset if iPRO has internal modem

extmodem/extreset if iPRO has external modem

ANALOG_LOCAL_IP = iPro’s IP during the dial-in.

To debug in dial-in mode:

change IP address in ISaGRAF – (through ISaGRAF Network Architecture)

compile

select debug

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 140 141

Pas de commentaire

Emerson iPro SERIES Manuel d'utilisateur Page 73