Emerson iPro SERIES Manuel d'utilisateur télécharger pdf (Page 26)

________________________________________________________________________________________________________

1592025400 – Vers. 1.0 - 26 -

5.3 Intranet / Ethernet connection (Local Area Network)

The Intranet or Ethernet connection should be initially managed by the net administrator

that will assign one free IP address to reach the iPRO. This number is an example of what

you should expect with the default IP of the iPRO: 192.168.0.250.

After receiving the address from your network Administrator the iPRO must be set with this

number (through the procedure described in the chapter 5.2).

Use a standard RJ45 network cable to connect the unit to your existing LAN.

The Intranet method allows the connection to interact with iPRO from all the PC Clients.

To check if the connection has been established try in this way:

• From your computer launch: start -Æ run

• In the box write the following string:

• Then click OK.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 140 141

Pas de commentaire

Emerson iPro SERIES Manuel d'utilisateur Page 26