Emerson iPro SERIES Manuel d'utilisateur télécharger pdf (Page 53)

________________________________________________________________________________________________________

1592025400 – Vers. 1.0 - 53 -

To check how many breakpoints there are in your application and if you need to remove

them, click the icon :

If the step by step set-up is completed, save and compile the application.

To test the system there are two ways:

• with SIMULATION .

• with DEBUG TARGET ; in this case the following operations are necessary:

o download the application with the breakpoints in the target

o disable the Watchdog (see the “Website for iPRO” chapter)

BE AWARE: when the debug test has been completed and you are in the DEBUG

TARGET, to enable the Watchdog is necessary to reboot the Target (iPRO).

When you will launch the debug, the ISaGRAF workbench will ask you the following

information; confirm with “Yes” or “Yes to all”.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 140 141

Pas de commentaire

Emerson iPro SERIES Manuel d'utilisateur Page 53