Emerson Smart Wireless THUM Adapter Manuel d'installation télécharger pdf (Page 48)

Reference Manual

00809-0100-4075, Rev CA

Appendix A: Reference Data

March 2014

Reference data

Housing option E - 316 SST

Paint - Polyurethane

M20-Conduit Adapter - SST

M20-Conduit Adapter O-ring - Buna-n

Antenna

Poly butadine terephthalate (PBT) / Polycarbonate (PC) integrated omnidirectional antenna

Weight

THUM Adapter only AL - 0.65 lbs. (0.29 kg)

THUM Adapter only SST - 1.1 lbs. (0.5 kg)

AL THUM Adapter with AL remote kit - 3.2 lbs. (1.45 kg)

SST THUM Adapter with SST remote kit - 5.8 lbs. (2.65 kg)

AL THUM Adapter with M20 conduit adapter - 0.85 lbs. (.038 kg)

SST THUM Adapter with M20 conduit adapter - 1.3 lbs. (0.59 kg)

Enclosure ratings

Housing option code D is NEMA 4X, and IP66.

Mounting

The THUM Adapter may be attached directly to the conduit of any 2- or 4-wire HART device or

mounted remotely by using the remote mount kit.

A.3 Performance specifications

ElectroMagnetic compatibility (EMC)

All Models:

Meets all relevant requirements of EN 61326-1 (2006) when installed with shielded wiring. The

sub-device must also use shielded wiring for installation.

Vibration effect

Output unaffected when tested per the requirements of IEC60770-1 field with general

application or pipeline with low vibration level (10-60 Hz 0.15 mm displacement peak

amplitude / 60-500 Hz 2g).

When the THUM Adapter is used on wired devices that are subject to vibration levels greater

than 2g, it is recommended that the THUM Adapter be remotely mounted using the remote

mount kit.

Temperature limits

Output specifications

The THUM allows Wireless communication between the HART device it is connected to and the

Smart Wireless Gateway.

Operating limit Storage limit

–40 to 185 °F –40 to 185 °F

–40 to 85 °C –40 to 85 °C

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 61 62

Pas de commentaire

Emerson Smart Wireless THUM Adapter Manuel d'installation Page 48