Emerson Smart Wireless THUM Adapter Manuel d'installation télécharger pdf (Page 18)

Reference Manual

00809-0100-4075, Rev CA

Section 2: Configuration

March 2014

Configuration

2.5.3 Configure THUM long tag

The Long Tag is how the THUM Adapter will show up in the Smart Wireless Gateway web

interface. By setting this parameter to a unique value it will be easier to determine which THUM

Adapter you are communicating with. One way to do this is to use the tag number of the wired

device that the THUM adapter is connected to followed by THUM (HARTTAG-THUM).

1. From the Home screen, select 2: Configure.

2. Select 1: Manual Setup.

3. Select 2: Device Information tab.

4. Enter the Long Tag.

2.5.4 Wired device tag

For HART 5 devices the THUM Adapter uses the message field when reporting the HART tag to

the Smart Wireless Gateway. To ensure that you can identify the wired device in the Gateway

make sure to write the tag information into the message field for all HART 5 devices. For HART 6

or newer devices the THUM reports the long tag as the HART tag to the Gateway.

Fast Keys

2, 2, 4, 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

Pas de commentaire

Emerson Smart Wireless THUM Adapter Manuel d'installation Page 18