Emerson Comverge IntelliTEMP 900 Guide de dépannage télécharger pdf (Page 18)

Menu Options Description • Homeowner Manual

 0 – (Default) Displays the measured room temperature.

 -1° through -5° – Adjusts the displayed temperature the

speciﬁed number of degrees lower than the measured room

temperature.

6. Thermostat Settings – Energy Mgmt Recovery

Options for this menu item include:

 OFF – (Default) The system starts heating or cooling at the

start time for the program period.

 ON – The system starts heating or cooling before the start

time for the program period so that the room temperature

reaches the program setpoint at the period start time.

Example: You select EMR ON and have your heat (conventional

heating system) programmed to 65° at night and 70° at 7:00

AM (a difference of 5°). Allowing 7 minutes per degree, the

thermostat will start calling for heat prior to the 7:00 AM period

start time in an attempt to reach the 70° setpoint by 7:00 AM.

With EMR OFF, the thermostat will wait until the 7:00 AM period

start time to begin heating the home.

7. Thermostat Settings - °F/°C

You can display temperature in either:

 °F – (Default) Fahrenheit

 °C – Celsius (Centigrade)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Emerson Comverge IntelliTEMP 900 Guide de dépannage Page 18