Emerson 5-In-One Learning Light-Up Remote Manuel d'utilisateur télécharger pdf (Page 22)

Troubleshooting

1. The

button is slightly recessed to avoid accidental

programming changes. You might need to use a

pointed device, such as a ballpoint pen, to apply

sufficient pressure.

2. If the remote control stops working after you have

successfully tested the control for each device, or if

you are unable to get the remote control to work at

all, do the following:

• Be sure you press the device key for the device you

want to control before you press any other key.

• Confirm that your IR devices are working properly

by using the original remote control or the manual

controls.

• Replace the batteries.

•

If you have any other problems, call customer service at

888-631-9859.

CARE

Keep the remote dry; if it gets wet, wipe it dry immediate-

ly. Use and store the remote only in normal temperature

environments. Handle the remote carefully; do not drop

it. Keep the remote away from dust and dirt, and wipe it

with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the remote’s internal com-

ponents can cause a malfunction and might invalidate its

warranty. If your remote is not performing as it should,

take it to your local RadioShack store for assistance.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Emerson 5-In-One Learning Light-Up Remote Manuel d'utilisateur Page 22