Emerson Mesa Sole Spécifications télécharger pdf (Page 17)

Emerson Network Power

Wireline Products

631-205-105

Version C, August 2009

Page 12 of 23 Proprietary Information Outside Plant Equipment

Step 1: Insert the lifting cable sling connecting links securely through each of

the two lifting ears (Fig. 7). To prevent the cabinet from tipping when the

pallet brackets are removed, take up the slack with the crane. DO NOT

tighten the cables so that the pallet lifts. The weight of the pallet will

make it difficult to remove the bracket bolt.

Step 2: If installed, use a 216-type tool to remove the OSP cable side base panel

of the battery chamber (Fig. 8).

Fig. 7 : Lifting the Cabinet

TWO SLINGS SHOULD

BE USED - ONE FOR

EACH EYEBOLT.

MINIMUM REQUIRED

LENGTH OF SLINGS IS

8 FT (2.4M).

Fig. 8 : Removing Battery Chamber Base Panel

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Emerson Mesa Sole Spécifications Page 17