Emerson Avocent ACS 6000 Advanced Console Server Guide de l'utilisateur télécharger pdf (Page 52)

46.....Avocent® ACS 6000 Advanced Console Server

b. To allow any connection, select Enable.

5. When the PAP authentication protocol is configured for the port, select the authentication type

from the PPP/PAP Authentication menu.

6. Click Save.

To configure callback users and phone numbers for ports with the Dial-in Profile:

1. Select Ports - Dial-In Profile - Secure Dial-In - Callback Users.

2. Click Add.

3. Enter the name and phone number used to perform the callback in the appropriate fields and

click Save.

To configure PPP OTP users for ports with the Dial-in Profile:

1. Select Ports - Dial-In Profile - Secure Dial-In - PPP OTP Users.

2. Click Add.

3. Enter the username and passphrase in the appropriate fields and click Save.

NOTE: This PPP OPT user will establish PPP connection after being successfully authenticated.

To configure EAP-TLS as PPP authentication for ports with the Dial-in Profile:

1. Select Ports - Serial Ports.

-or-

Select Ports - Auxiliary Ports.

2. Check the box next to the port where the modem is connected and click Set Dial-In.

NOTE: If using an auxiliary port, the modem can be internal.

3. Configure the PPP Address settings. For example, set the PPP Address to Local

Configuration using 10.0.0.1 as the Local IPv4 Address and 10.0.0.2 as the Remote IPv4

Address.

4. For PPP Authenticaion, select the button next to By Appliance, and then select the button

next to EAP for the protocol. Click Save.

5. Select Ports - Dial-In Profile - Settings.

6. Use the drop-down menu to enable the PPP Connection and click Save.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 92 93

Pas de commentaire

Emerson Avocent ACS 6000 Advanced Console Server Guide de l'utilisateur Page 52