Emerson MONITORING OpenComms Manuel d'utilisateur télécharger pdf (Page 50)

Nform Monitoring—Navigation Tree

12.2.2 HTML control tab (selected devices only)

The HTML control tab allows you to take actions such as testing a UPS battery or turning an SNMP

device on or off. This tab appears only for certain devices with Web-enabled SNMP cards.

To use the HTML control tab:

• Log on as either Administrator or Power User.

• Click on Nform’s Navigate tab.

• In the left side of the window, click on the device you wish to view.

• In the right pane, click on the HTML control tab.

• In the center of the window, click on a control operation—for example, Alarm Silence.

• A window asks for the SNMP card user name and password. Enter the user name and password

and click OK.

• The example below shows the Alarm Silence control function for an HTML-supported UPS.

NOTE

The Control feature may not be available on every HTML-supported device.

Nform displays information

for selected control

operation and device

Highlight device name,

then click on control operation—

for example, “Alarm Silence”

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 72 73

Pas de commentaire

Emerson MONITORING OpenComms Manuel d'utilisateur Page 50