Emerson SS-100 Manuel d'utilisateur télécharger pdf (Page 9)

SS-100 Serial Server SS-100 Wiring Requirements • 3

7. Plug 110VAC/5VDC power transformer into the

SS-100.

SS-100 to Reflecs Steps

1. Connect the 25-pin end of the D25/DB9 straight-

through connector to the SS-100.

2. Connect the 9-pin female end of the laptop cable

to the straight-through serial connector.

3. Connect the SS-100 to the hub using the RJ-45

able.

4. Plug the 4-position plugable connector into the

Reflecs controller.

5. Plug 110VAC/5VDC power transformer into the

SS-100.

Wiring Layout with UltraSite

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Emerson SS-100 Manuel d'utilisateur Page 9