Emerson Liebert IntelliSlot IS-WEBRT3 Card Manuel d'utilisateur télécharger pdf (Page 25)

Telnet—Remote Monitoring

6.0 TELNET—REMOTE MONITORING

6.1 Introduction

The Liebert IS-WEBRT3 card supports multiple Network Management Systems and LAN protocols.

After installing and configuring the card, you have the same configuration selections using Telnet

that are avaialble through the Web page.

6.2 Telnet Configuration

1. Click on Start>Run and enter telnet and the Liebert IS-WEBRT3 cards IP address.

Figure 27 Telnet startup

2. If the connection is successful, the window in Figure 28 will be displayed.

Figure 28 Telnet connection

3. Press the Enter key to enter telnet main screen. If the user name and password were set

previously, enter those actual values to gain access.

4. If the connection is successful, the main screen in Figure 29 will be displayed.

Figure 29 Liebert IS-WEBRT3 card Telnet window

1 2 ... 20 21 22 23 24 25 26 27 28

Pas de commentaire

Emerson Liebert IntelliSlot IS-WEBRT3 Card Manuel d'utilisateur Page 25