Emerson Solu Comp Xmt-P-FF/FI Manuel d'instructions télécharger pdf (Page 46)

MODEL XMT-C SECTION 5.0

DISPLAY AND OPERATION

5.4 MENU TREES

The Model Xmt-C-HT transmitter has four menus: CALIBRATE, PROGRAM, HOLD, and DISPLAY. Under the

Calibrate and Program menus are several sub-menus. For example, under CALIBRATE, the sub-menus are

Conductivity and Temperature. Under each sub-menu are prompts. Under PROGRAM, the sub-menus for

Xmt-C-HT are Output, Temp, Measurement, Security, HART, and Reset Analyzer. The HOLD menu (HART

only) enables or disables the 4-20 mA outputs. The DISPLAY menu allows the user to configure the main dis-

play information fields and to adjust the LCD display contrast. Figure 5-3 shows the complete menu tree for

Model Xmt-C-HT. Figure 5-4 shows the complete menu tree for Model Xmt-C-FF.

5.5 DIAGNOSTIC MESSAGES

Whenever a warning or fault limit has been exceeded, the transmitter displays diagnostic messages to aid in trou-

bleshooting. “Fault” or “Warn” appears in the main display to alert the user of an adverse condition. The display

alternates between the regular display and the Fault or Warning message. If more than one warning or fault mes-

sage has been generated, the messages appear alternately.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 77 78

Pas de commentaire

Emerson Solu Comp Xmt-P-FF/FI Manuel d'instructions Page 46