Emerson CSI 9420 Spécifications télécharger pdf (Page 14)

Reference Manual

MHM-97408, Rev. 2

June 2008

CSI 9420

2-4

1. Set the wirelesss Network ID

2. Set the wireless network Join key

3. Specify the TAG and Device Description if desired

4. Specify the type of sensor(s) installed

5. Specify the measurements to be mapped to the standard HART

variables: PV, SV, TV, and QV.

6. Enter the “Sensor Sensitivity” for the installed accelerometer(s)

7. Set the alert threshold

8. Specify the update rate.

The specific user interface (UI) available for performing this configuration

varies depending on the host that is used.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 77 78

Pas de commentaire

Emerson CSI 9420 Spécifications Page 14