
Rohrback Cosasco Systems, Inc. - The World Leader in Corrosion Monitoring Systems Specifications subject to change without notice
Self-organizing Network
Specifications
Protocol
IEC 62591(WirelessHART), 2.4 - 2.5 GHz DSSS.
Maximum Network Size
25 wireless devices @ 2 sec. or greater
12 wireless devices @ 1 sec.
Supported Device Update Rates
1, 2, 4, 8, 16, 32 seconds or 1 - 60 minutes
For information on network size and update rate, please
see the capacity estimator tool on the Smart Wireless
homepage by following the link:
http://www.emersonprocess.com/Wireless.
Network Size/Latency
25 Devices: less than 5 seconds
Data Reliability
Greater than 99%
System Security Specifications
Ethernet
Secure Sockets Layer (SSL) enabled (default) TCP/IP
communications
Emerson Smart Wireless Gateway Access
Role-based Access Control (RBAC) including
Administrator, Maintenance, Operator, and Executive.
Administrator has complete control of the Gateway and
connections to host systems and the self-organizing
network.
Self-organizing Network
AES-128 Encrypted WirelessHART, including individual
session keys. Drag and Drop device provisioning,
including unique join keys and white listing.
Internal Firewall
User Configurable TCP ports for communications
protocols, including Enable/Disable and user specified port
numbers. Inspects both incoming and outgoing packets.
Third Party Certification
Wurldtech: Achilles Level 1 certified for network resiliency
National Institute of Standards and Technology (NIST):
Advanced Encryption Standard (AES) Algorithm
conforming to Federal Information Processing Standard
Publication 197
Product Certifications
Telecommunication Compliance
All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product certification.
Emerson is working with governmental agencies around the
world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device
usage.
FCC and IC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: This device
may not cause harmful interference. This device must accept
any interference received, including interference that may
cause undesired operation. This device must be installed to
ensure a minimum antenna separation distance of 20 cm from
all persons.
European Directive Information
The EC declaration of conformity can be found on page xx.
The most recent revision can be found at
www.emersonprocess.com.
Ordinary Location Certification from FM
Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by FM Approvals, a nationally
recognized testing laboratory (NRTL) as accredited by the
Federal Occupational Safety and Health Administration
(OSHA).
Hazardous Locations Certifications
North American Certifications
N5 FM Approvals, Nonincendive for Class I Division 2
Certificate No.: 3049590
Standards Used:Class 3600:2011, Class 3611:2004,
Class 3810:2005
Markings: NI CL I, DIV. 2, GP A, B, C, D
Temperature code: T4 (-40 °C≤Ta≤60 °C)
Special Condition of Use:
1. When installed as Division 2 equipment, the 1410 shall be
mounted within a tool-secured enclosure which meets the
requirements of ANSI/ISA 61010-1 and be capable of
accepting the applicable wiring methods per the NEC.
N6 CSA Class I Division 2
Certificate No.: 2646342
Standards Used: CSA Std. C22.2 No. 0-10, CSA Std. C22.2
No. 213 - M1987, CSA Std. C22.2 No.61010-1-12,
ANSI/ISA 12.12.01-2012, ANSI/ISA 61010-1-2012
Markings: SUITABLE FOR CL I, DIV. 2, GP A, B, C, D
Temperature code: T4 (-40 °C ≤ Ta ≤ 70 °C)
Notes:
- Shall be powered by a class 2 power supply.
- Suitable for dry indoor locations only.
- Equipment must be installed in a suitable tool accessible
enclosure subject to the end use application.
Commentaires sur ces manuels