Emerson CKS2237 Manuel du propriétaire Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 22
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
9
MANUAL TIME ADJUSTMENTS
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will
always be on time. Even though the SmartSet
®
sets the time by itself, you still have
the option of adjusting the time manually if you wish.
To manually adjust the time display depress and hold the TIME button, and press
either the SET + or SET buttons to adjust the time display ahead or back as
desired. Each press of the SET + or SET buttons will change the display by one
minute. If you hold the SET + or SET buttons the display will continue to change.
The display will change slowly at first, one minute at a time. But if you continue
holding the SET + or SET buttons the display will change rapidly.
NOTE:If you manually adjust the time, your new setting is entered into the
SmartSet
®
memory. If the power is interrupted, the display will return to your
new setting, not the original setting, when the power is restored.
ADJUSTING THE WAKE UP TIMES
Your SmartSet
®
clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
1.) Depress and hold either the ALM 1 or ALM 2 setting button. The main display
will change from the correct time to the Alarm 1 or Alarm 2 wake up time.
2.) While holding the ALM 1 or ALM 2 setting button, depress either the SET + or
SET button to move the display ahead or back to your desired wake up time.
3.) When the desired wake up time appears on the display, release all buttons.
NOTE: Be sure that you have set the wake up time correctly by observing the
AM indicator. If the AM indicator is On the wake up time is AM. If the AM
indicator is Off, the wake up time is PM.
CKS2237_073106.p65 31/7/2006, 11:119
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Commentaires sur ces manuels

Pas de commentaire