Emerson CR202EM9 Manuel du propriétaire télécharger pdf (Page 8)

[] Basic Connection

Thissectiondescribeshowto c0nnectthe unittoanantenna,cable/satellitebox,etc.

Note:

• Besure your an tenna or other device is connected properly before plugging in the power cord.

[Antenna Cable Connection]

When connecting the unit to an antenna or cable TV company (without cable/satellite box)

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VH F/UHF'_

antenna _ "

RF coaxial cable

rear of this unit

cableTV

company

_Once connections are completed, turn on the unit and begin initial setup.

Channel scanning is necessary for the unit to memorize all available channels in your area.

(Refer to"Initial Setup"on page 10.)

Note:

• Foryour safety and to avoid damage to device,please unplug the RFcoaxial cable from the an tenna input jack before moving the unit.

• Ifyou use an antenna to receive analog TV,it should also work for DTV reception. Outdoor or attic antennas will be more effective than

settop versions.

• Toeasily switch your reception source between antenna and cable, install an antenna selector.

• fyou connect to the cable system directly, contact the CATVinstaller.

[Connection to Cable Box or Satellite Box]

Connect the RF coaxial cable on your home outlet to the input jack of the cable/satellite box.

Use another RFcoaxial cable to connect the antenna input jack of the unit to the output jack of the cable/satellite box.

e.g.)

satellite

dish

cable/satellite box

rear of this unit

RF OUT

coaxial cable RF coaxial cable

_Required cables and connecting methods differ depending on the cable/satellite box.

For more information, please contact your cable/satellite provider.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Pas de commentaire

Emerson CR202EM9 Manuel du propriétaire Page 8