Emerson AV101 Manuel de service Page 15
- Page / 57
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
5-2 L6610EA
2. Initial Setting
General
1. Enter the Service mode. (See page 5-1)
2. Press "VOL p" button on the service remote control
unit. Display changes "C/D," "7F," "LANGUAGE,"
"ACCESS CODE," "SOUND TYPE," "VIDEO
TONE," "FM MODE," "V-OUT," "VIDEO," "AV
MEMO," "STABLE SOUND," "FILTER," "500," and
"YUV MEMORY" cyclically when "VOL p" button is
pressed.
3. To set the following each data value, press "CH o
/ p" buttons on the service remote control unit.
7F --- Set to "FF."
LANGUAGE --- Set to "SPA."
ACCESS CODE --- Set to "OFF."
SOUND TYPE --- Set to "MTS."
VIDEO TONE --- Set to "ON."
FM-MODE --- Set to "OFF."
V-OUT --- Set to "OFF."
VIDEO --- Set to "V1/V2/YUV."
AV MEMO --- Set to "OFF."
STABLE SOUND --- Set to "OFF."
FILTER --- Set to "ON."
Adjusting the monitoring time --- Set to "500."
YUV MEMORY --- Set to "OFF."
3. Setting for BRIGHT, CONTRAST,
COLOR, TINT, and SHARPNESS
data Values
General
1. Enter the Service mode. (See page 5-1)
2. Press "MENU" button on the service remote control
unit. Display changes "BRT," "CNT," "CLR," "S-
CLR," "C-CLR," "TNT," "V-TNT," "S-TNT," "C-
TNT," "SHARP," "S-SRP," and "C-SRP" cyclical-
ly when "MENU" button is pressed.
CNT
1. Press "MENU" button on the service remote control
unit. Then select "CONTRAST" (CNT) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "CONTRAS" (CNT)
becomes 84.
CLR
1. Press "MENU" button on the service remote con-
trol unit. Then select "COLOR" (CLR) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "COLOR" (CLR)
becomes 56.
S-CLR
1. Press "MENU" button on the service remote con-
trol unit. Then select "S-COLOR" (S-CLR) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "S-COLOR" (S-
CLR) becomes 56.
C-CLR
1. Press "MENU" button on the service remote con-
trol unit. Then select "COMPONENT COLOR" (C-
CLR) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "COMPONENT
COLOR" (C-CLR) becomes 56.
TNT
1. Press "MENU" button on the service remote con-
trol unit. Then select "TINT" (TNT) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "TINT" (TNT) be-
comes 62.
V-TNT
1. Press "MENU" button on the service remote con-
trol unit. Then select "V-TINT" (V-TNT) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "V-TINT" (V-TNT)
becomes 62.
S-TNT
1. Press "MENU" button on the service remote con-
trol unit. Then select "S-TINT" (S-TNT) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "S-TINT" (S-TNT)
becomes 59.
C-TNT
1. Press "MENU" button on the service remote con-
trol unit. Then select "COMPONENT TINT" (C-
TNT) display.
2. Press "CH o/p" buttons on the service remote
control unit so that the value of "COMPONENT
TINT" (C-TNT) becomes 58.
SHARP
1. Press "MENU" button on the service remote con-
trol unit. Then select "SHARPNESS" (SHARP) dis-
play.
2. Press "CH o/p" buttons on the service remote
control unit and select "47."
S-SRP
1. Press "MENU" button on the service remote con-
trol unit. Then select "S-SHARPNESS" (S-SRP)
display.
2. Press "CH o/p" buttons on the service remote
control unit and select "47."
- SERVICE MANUAL 1
- IMPORTANT SAFETY NOTICE 2
- SPECIFICATIONS 3
- IMPORTANT SAFETY PRECAUTIONS 4
- Precautions during Servicing 6
- Safety Check after Servicing 7
- STANDARD NOTES FOR SERVICING 8
- Instructions for Handling 10
- Semiconductors 10
- 1. Disassembly Flowchart 11
- 2. Disassembly Method 11
- 4-2 L6610DC 12
- TV Cable Wiring Diagram 13
- Test Equipment Required 14
- 1. +B Adjustment 14
- 2. Initial Setting 15
- COLOR, TINT, and SHARPNESS 15
- SD Check mode (Factory mode) 16
- 7. H. Position Adjustment 17
- 8. V. Size Adjustment 17
- 9. V. Position Adjustment 17
- 10. U-Pedestal Adjustment 17
- 11. V-Pedestal Adjustment 17
- PATTERN GENERATOR 18
- EXT. INPUT 18
- 16. White Balance Adjustment 19
- 17. Sub-Brightness Adjustment 19
- 18. Focus Adjustment 19
- GREEN RED BLUE 20
- 22. Yh, Yv, Xv Adjustment 21
- BLOCK DIAGRAMS 22
- IF/Video Block Diagram 23
- Audio Block Diagram 24
- CRT/H.V. Block Diagram 25
- HOT COLD 26
- Standard Notes 27
- THE FOLLOWING PAGES: 28
- Main 1/4 Schematic Diagram 29
- L6610SCM1 29
- L6610SCM2 30
- Main 2/4 Schematic Diagram 30
- Main 3/4 Schematic Diagram 31
- L6610SCM4 32
- Main CBA Top View 33
- Main CBA Bottom View 34
- 10 V 5 ms 36
- MAIN CBA 37
- BL6650F01011-1 37
- 9-1 L6610WI 37
- BL6650F01011-2 37
- IC PIN FUNCTIONS 38
- EXPLODED VIEWS 40
- S7 (EWF2703 only) 41
- MECHANICAL PARTS LIST 42
- DY551 (OR L551): 43
- Deflection Yoke Part 43
- Ref. No. Description Part No 44
- CAPACITORS 44
- CONNECTORS 47
- TRANSISTORS 49
- RESISTORS 51
- SWITCHES 54
- MISCELLANEOUS 54
- 20030408 13-12 L6610EL 55
- Printed in Japan 57
- 2003-05-20 HO 57
- 6427FD/EWF2703 L6610UA/16UG 57
Produits connexes et manuels pour Télévisions à tube cathodique Emerson AV101
(29 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.549 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels