Emerson ZB Copeland Scroll Informations techniques Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 21
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
C6.1.7/0609-1110/E 13
The electronic controller enables:
1. compressor modulation and / or staging based on suction pressure;
2. TCP/IP Ethernet with web server functionality allows monitoring and configuration of
controllers through a standard web browser;
3. alarm messaging by email;
4. fan speed control if an Alco Controls FSP150 fan speed driver is installed.
Figure 9: Electronic controller EC2-552
The controller has been pre-programmed with a number of parameter values that are most likely
correct. Individual installation requirements however may make it necessary to alter parameter
settings.
The control target of the compressor controller (1) is to maintain the suction pressure at a
defined value by varying the available compressor capacity.
The control target of the condenser controller (2) is to maintain the condensing pressure at a
defined value. This is done by varying the fan speed, if fan speed control is installed.
3.6 Parameters
3.6.1 Select parameter configuration
The configuration parameters can be protected by a numerical password. A value of “0” disables
this protection (default password: 12).
To select the parameter configuration:
Press the Prg button for more than 5 seconds
In case of password value equal to “0”:
The first modifiable parameter code is displayed (/1)
To modify parameters see ”Parameter modification” below
In case of password value not equal to “0”:
A flashing 0 is displayed
Press or until the password value is displayed
Press SEL to confirm password
The first modifiable parameter code is displayed (/1)
To modify parameters see “Parameter modification” below
Controller 2: Fan
Value to be displayed:
LED ON: pressure
LED OFF: temperature
Active alarm
)
Compressor 1: On
Fan: On
Compressor 2: On
IR service LED
Controller 1: Compressor
Safety
instructions
Product
description
Installation
Starting up &
operation
Maintenance &
repair
Certification &
approval
Dismantling &
disposal
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire